Tools & Tuning

Fluor Free The F4 series of universal gliders gives you good glide quickly and easily. - Easy wax for all conditions - No iron needed F4 Universal All Temperature Paste wax on tube. For skis and snowboards. All snow conditions. With foam applicator. Apply and go! Special tip: Use F4 Combi Brush (T0166B). Polish with the felt and then brush lightly. Based upon Future Cera® raw materials, which grant for high quality and an environmentally friendly profile.

F4 universal liquid glide wax for skis and snowboards. A wax with a wide range of uses. - Universal wax for all temperature ranges - Glide wax for ski mountaineering and summer skiing - Preservative wax for metal edges - Easy application

F4-100NW has a sponge foam applicator on one side of the bottle for applying wax, and a felt pad on the other side for polishing. A handy bottle to carry in your pocket. Apply a thin layer over the base surface. Let it dry for approx. 2 minutes. Finish by polishing with the felt pad. Apply F4 to the steel edges when storing your skis or board after the season. This prevents the edges rusting.

HS liquid glide waxes are so easy to use that anyone can achieve a good result without having a dedicated waxing booth or lots of extra equipment. Glide wax spray is a popular choice for leisure skiers. High Speed (HS) is specially developed for younger racers and the ambitious leisure skier. All waxes in this series have high performance and good durability. This makes them an affordable option for both competition and training. About HS10L: A liquid training and racing wax that can be used alone or as a base for other glide products. HS10L is optimized for very wet conditions when the snow has been transformed. Ideal in spring for dirty snow conditions. A good choice that never underperforms in warm conditions. How to apply HS10L: Spray on the ski, wait 15 minutes and brush off with a T21 natural cork with felt. Features: - Fantastic for warm conditions - Improves ski glide - For training and racing - Fluoro-free and 100% biodegradable - Also available as hot wax - Thoroughly tested in different conditions

Liquid glide wax for racing and fast training sessions. HS7L is recommended from -2 to -8 degrees. - A very good glide wax for traditional winter conditions - No need for a waxing iron - Replaces CH7XL.

Ski cleaner for cleaning ski bases and removing wax and klister. Spray on the base, remove as much wax as possible with a scraper and wipe with Fiberlene. The active ingredient in this ski cleaner is a low-aromatic hydrocarbon which has a good effect on grease and dirt. The aerosol has propellant gas that does not damage the ozone layer and the ski cleaner is less flammable and less environmentally harmful than most other ski cleaning products. Practically odorless. *Danger: Extremely flammable aerosol. Pressurized container: May burst if heated. May cause drowsiness or dizziness. Harmful to aquatic life with long-lasting effects. Repeated exposure may cause skin dryness or cracking.

PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F). - A versatile wax for warm conditions - Low melting point and easy to apply

PS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. PS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as a race wax alone or as a base for powders and other top coats. Recommended iron temp: 145°C (293°F). - Recommended iron temp: 145°C (293°F). - Replaces the CH6X - -6°C to -12°C (21°F to 10°F).

PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end result. PS7 is an economic training and racing wax as well as an all-round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). - Recommended iron temp: 140°C (284°F). - Replaces the CH7X. - -2°C to -8°C (28°F to 18°F).

PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). - Recommended iron temp: 130°C (266°F). - Replaces the CH8X. - -4°C to +4°C (25°F to 39°F).

Side edge file guide in handy pocket size and ergonomic design for a secure grip. The side edge can be set to either 87 or 88 degrees. 40mm quality file included - 40mm quality file included

Great economy wax iron for alpine and nordic. Value for the money! 110 Volt. 1000 Watt. Great economy iron which is competitive with far more expensive models. Redesigned from scratch with an ergonomic body and a wide metal plate that suits both alpine, snowboard and nordic. Angled at one side to make it easier to keep a constant speed when melting the wax. The thick metal plate ensures a stable heating. Plate dimension 100x160 mm. Also available for 220 Volt (product # T77220).

Medium diamond grindstone for skis and snowboards. 100 mm. Medium diamond grindstone with plastic plate. Yellow. 100 mm. The grindstone is used to tune the edges. Red and yellow are the two grindstones you must have. Great value. - Diamond file - For snowboards and alpine skis - For alpine skiers and snowboarders - Sharp and exact

The UR range is a range of fluoro-free glide wax for training and racing. - An extra soft glide wax - For warm conditions - For those who want a better skiing experience - High durability

The UR range is a range of fluoro-free glide wax for training and racing. - A hard glide wax - For cold conditions - For those who want a better skiing experience - High durability